Skip to content
OneSource Integration LLC

Winter closer season Cold slows closers and stiffens weatherstripping. A slamming door needs adjusting. More →

Services

Door closers — adjusted, repaired, replaced.

The closer is the hardest-working component on a commercial door and the one that fails most often. A door that slams, drifts, or won't latch usually needs a closer adjusted, repaired, or correctly replaced — rarely a new door. Serving commercial buildings across Central New York.

What This Covers

Adjustment & Tuning

Closing speed, latching speed, backcheck, and spring power are all adjustable, and many closers called "broken" only need tuning. That's worth ruling out first: a replacement typically runs several times the cost of an adjustment.

Repair & Replacement

Leaking oil, bent arms, and stripped valves mean the closer is done. A replacement should be sized to the door's width, weight, traffic, and exposure. The cheapest unit on the shelf is how an opening ends up back in the same condition a couple of winters later. I work on commercial-grade closers from LCN, Norton, Sargent, and other major manufacturers.

Arms, Mounting & Options

The wrong arm or mounting is a common source of closer problems. Regular arm, parallel arm, top jamb, concealed, and floor closers each fit different openings. Delayed action, stop and hold arms, and backcheck for wind-exposed doors solve problems that adjustment alone can't.

ADA & Fire Code

ADA limits opening force on interior doors to 5 pounds and sets a minimum closing time. Fire doors are held to a different standard: they have to close and latch every time, and that takes priority over opening force. Getting both right on the same building is the job.

Closer trouble announces itself.

A slamming door damages the door, the frame, the hardware, and the first impression of everyone who walks through it. It usually gives months of warning before anyone calls.

Symptoms Worth a Second Look

A note on fire doors: Fire-rated doors can only be held open by devices that release automatically on a fire alarm. A mechanical hold-open arm, a wedge, or a kick-down stop on a fire door is a code violation, not a convenience.

Questions About Door Closers

Why does my door latch fine in summer and not in winter?

Usually two things are happening. Closer fluid thickens in the cold, which slows the whole cycle, so a closer set correctly in July delivers noticeably less latching speed in January.

On entrances and vestibules, building pressure is often the bigger factor: heated air pushes against the door and holds it off the strike.

Either way, it's almost always an adjustment, not a replacement. If the door latches when you push it closed by hand, the door and strike are fine and the closer needs its latch speed turned up.

How long should a commercial door closer last?

A good-quality closer on a properly sized and adjusted opening can last many years, even on a busy entrance. The ones that fail early are usually undersized for the door, mounted with the wrong arm, or never adjusted after installation.

For high-traffic doors, look for closers rated ANSI/BHMA A156.4 Grade 1.

Will a new closer fit the existing holes?

Sometimes. Different brands and models use different mounting patterns. When they don't line up, a drop plate or adapter plate can usually fit the new closer without new holes in the door or frame.

That matters on fire-rated doors, where field modifications are restricted.

Can our maintenance staff adjust closers themselves?

Basic speed adjustments, yes — carefully, a small turn at a time. Turning a valve out too far can let fluid out and ruin the closer.

Spring power, backcheck, arm changes, and anything on a fire door are better left to someone who does it every day.

Why did an inspector flag our closer?

The most common reasons are a fire door that doesn't close and latch on its own, a hold-open that doesn't release on alarm, missing or damaged parts, and opening force too high for ADA. ADA's 5-pound limit applies to interior doors; fire doors and exterior doors follow different rules.

Most of these are fixed with adjustment or a parts change, not a full replacement.

All questions

Something here sound familiar?

Tell me what the door is doing and what building it's in. A free 15-minute phone consult is often enough to tell whether it's an adjustment or a replacement. For a full assessment, the door, frame, and hardware are looked at together, with the findings in writing.