Locks and keys, under your control.
A commercial lock has two jobs: survive hundreds of thousands of cycles, and let you control exactly who gets in. The hardware grade answers the first. The key system behind it answers the second, and it's the one that slips over time. Serving commercial buildings across Central New York.
What This Covers
Locksets & Deadbolts
Grade 1 and Grade 2 cylindrical locks, mortise locks, and commercial deadbolts, specified to the duty the door actually sees, not the duty it was assumed to see. Alignment at installation determines most of what happens afterward. I work with Schlage, Sargent, Corbin Russwin, BEST, and other commercial manufacturers.
Rekeys & Master Key Systems
Staff turnover shouldn't mean new hardware. Existing hardware can usually be rekeyed, and a master key system lets one key run a building while each door stays individually controlled — as long as the system is designed before keys are cut, not after. Interchangeable cores let a lock be rekeyed in seconds without removing it from the door, which is worth considering on any building with regular turnover.
Repair & Key Control
Worn cylinders, gritty keyways, and misaligned latches, plus restricted and patented keyways, where keys can't be copied at a hardware store kiosk. Key control is a documentation problem at least as much as a hardware one.
If you're not sure who holds keys, someone else is.
Lock problems in a commercial building are usually one of two things: hardware wearing out, or key control quietly slipping away over several years of turnover. The second is far more common and far less visible.
Symptoms Worth a Second Look
- The key sticks, wiggles, or needs a knack
- The cylinder spins or feels gritty
- Keys are unaccounted for after turnover
- The door needs lifting to lock
- The latch doesn't line up with the strike
- Residential-grade hardware is on a commercial door
- Many keys, no documented system
- You need keys that can't be copied
Questions About Commercial Locks & Keying
- Do we need new locks after an employee leaves?
Usually not. Most commercial locks can be rekeyed, which changes which keys work without replacing the hardware.
With interchangeable cores, it's a quick core swap at each door.
- What's the difference between Grade 1 and Grade 2 locks?
Grades come from ANSI/BHMA testing for cycles, strength, and security. Grade 1 is built for heavy commercial traffic; Grade 2 for light commercial.
Main entrances, stairwells, and busy corridors should be Grade 1.
- Can we add a deadbolt to an exit door?
Usually not on a required exit. Egress doors have to open in one motion from the inside. A separate deadbolt adds a second motion.
Mortise locks with a deadbolt that retracts when the lever is turned are the standard way to get both.
- What is a master key system, and do we need one?
One key opens many doors, while each door still has its own key.
It makes sense once a building has more than a handful of doors and more than a few key holders — as long as it's designed and documented before keys are cut.
- What are restricted keys?
Keys on a patented or restricted keyway that can only be duplicated through an authorized source, with a record of who has them.
They're how a key system stays under control after a few years of turnover.
Related
Something here sound familiar?
Tell me what the opening is doing and what building it's in. A free 15-minute phone consult is often enough to tell what you're dealing with. For a full assessment, the door, frame, and hardware are looked at together, with the findings in writing.