Skip to content
OneSource Integration LLC

Winter closer season Cold slows closers and stiffens weatherstripping. A slamming door needs adjusting. More →

Services

Doors on a schedule, not on a prayer.

A maintenance program puts every closer, exit device, lock, and seal in a building on a scheduled inspection and adjustment cycle — so wear gets caught on a planned visit rather than discovered by your staff, your tenants, or your fire marshal. Serving commercial buildings across Central New York.

Start with an assessment

Every part of every opening, checked on a cycle.

Closers, Operators & Hinges

Closing and latching speeds re-tuned for the season, arms and mounts tightened, hinges checked before a door starts to drop. The hardware that moves is the hardware that wears, and in this climate a closer set correctly in July is set wrongly by January.

Exit Devices & Egress

Every panic device cycle-tested, latching verified, and egress confirmed as one motion. Fire-rated assemblies get their required annual inspection documented, so the paperwork exists before anybody asks to see it rather than after.

Locks, Keying & Sealing

Cylinders serviced, key control reviewed, strikes aligned, and weatherstripping checked ahead of the heating season. The quiet items that cost money slowly — drift, drafts, and a key system nobody has documented since the last tenant.

Doors fail at opening time.

Nearly every door problem worth writing about announced itself quietly for months first. A scheduled program is how a building hears the announcement instead of the failure. For some openings it isn't discretionary:

  • Fire-rated door assemblies require annual inspection under NFPA 80
  • Egress doors must open in one motion — every day, not most days
  • ADA openings carry opening-force and closing-speed requirements
  • Insurance and lease audits increasingly ask for door documentation
  • Central New York winters change every door twice a year
  • Deferred door repairs cost more than scheduled ones, consistently
  • Key control drifts with every staff change unless it's reviewed
  • A documented history makes the next problem faster to diagnose

Four steps to not thinking about the doors.

  1. Building Survey

    Every door, closer, exit device and lock documented — condition, code status and remaining service life. This is the deliverable that has value on its own, whatever you decide to do next with it.

  2. The Program, Proposed

    A schedule built around the building: visit frequency, what gets inspected, and what's included. Openings vary enormously in how hard they work, and a program that ignores that is just a calendar reminder.

  3. Scheduled Visits

    Inspection, adjustment and documentation on the calendar rather than after the failure. Most visits find nothing dramatic, which is the entire point of the exercise.

  4. Documentation & Priority

    The inspection records an insurer, landlord or fire marshal will ask for — and a building whose history is written down when something does need attention between visits.

Built for buildings that can't close.

Restaurants and cafés, retail, professional offices, dental and medical practices, shopping centers, schools and small industrial buildings — and property managers who would rather hold one door relationship than a folder of one-off invoices.

Door hardware fails slowly and then suddenly.

Almost everything that gets replaced was adjustable six months earlier. The economics of reactive maintenance are bad in a specific way: you pay emergency rates to replace something a scheduled visit would have adjusted, and you do it on the schedule of whatever failed rather than yours.

Visit frequency by door type

Not every door needs the same interval. High-cycle retail and school entrances justify quarterly attention; interior office doors are fine annually. Rated assemblies are annual at minimum because NFPA 80 says so. The plan is built around the openings that actually move.

Documentation after each visit

What was checked, what was adjusted, what was found, and what's recommended, per opening — not a single line on an invoice. Over a few cycles that becomes a history, which is what tells you a particular door is actually failing rather than just annoying.

Questions About Maintenance Plans

How often should commercial doors be serviced?

It depends on traffic. Busy entrances and storefronts benefit from quarterly visits; quieter interior doors may only need an annual check.

Fire-rated doors need an annual NFPA 80 inspection regardless.

Does a plan include the annual fire door inspection?

It can, and that's usually the most efficient way to do it: the inspection and the adjustments it calls for happen on the same visit.

What do we get after each visit?

A record per opening: what was checked, what was adjusted, and what needs attention before the next visit.

Is a maintenance plan worth it for a small building?

If the building has rated doors, a busy entrance, or a door that keeps failing, usually yes. If not, an annual check may be enough.

All questions

Put the doors on a calendar.

Tell me what the building is and roughly how many openings it has. A free 15-minute phone consult is often enough to tell what you're dealing with. For a full assessment, the door, frame, and hardware are looked at together, with the findings in writing.