One vendor. Every door.
Locations across New York State? Commercial door hardware service, compliance documentation, and scheduled maintenance from a single provider based in Baldwinsville, NY — with one point of contact and paperwork that survives an audit at every site.
What This Covers
Scheduled Maintenance
Planned visits on a frequency matched to door type and traffic, rather than waiting for the call. Adjustment, lubrication, fastener checks, and alignment on the openings that carry the building — which is most of what keeps hardware out of the replacement cycle.
NFPA 80 Inspections
The annual fire door inspection the standard requires, performed and documented per opening. Handled inside the maintenance program rather than as a separate scramble when an inspector asks.
ADA Compliance
Opening force, closer sweep timing, hardware height, and operability checked with a gauge rather than assumed. Most failures are closer adjustment, correctable on the visit, and most buildings have drifted out of range without anyone touching a door.
Priority & After-Hours Response
A standing relationship means a door that won't lock or won't open gets handled fast, at a known rate — including after hours, at an after-hours rate.
Three vendors, no records, and a door nobody owns.
The usual state of a building that's been maintained reactively. The cost isn't the individual calls — it's the hardware replaced early because nobody adjusted it, and the compliance gap discovered by an inspector rather than by you.
Symptoms Worth a Second Look
- Separate vendors for locks, closers, automatic doors, and access control
- No written record of any fire door inspection, ever
- Hardware replaced rather than adjusted, repeatedly, on the same openings
- Nobody sure which doors in the building are rated
- ADA opening force never measured since the building opened
- Emergency calls at full rate because there's no standing relationship
Who this is for
Facility managers, property managers, building owners, and HOA boards responsible for commercial common areas. Anyone whose phone rings when a door stops working and who is also the person asked for the inspection records.
Background
More than 20 years on commercial openings.
Questions About For Facility Managers
- Can one vendor really cover every door?
For mechanical and electrified door hardware, yes — closers, exit devices, locks, hinges, seals, inspections, and the records behind them.
One vendor means one standard and one set of records.
- We don't have any fire door records. Where do we start?
With an inspection of the rated openings. That creates the record, and the findings become the first repair list.
- How is ADA compliance checked?
Measured, not eyeballed: opening force with a gauge, closer timing, hardware height, and whether the hardware works without tight grasping or twisting.
Related
Want one vendor across the whole building?
Tell me roughly how many openings, how many are rated, and what documentation exists today. A free 15-minute phone consult is often enough to tell what you're dealing with. For a full assessment, the door, frame, and hardware are looked at together, with the findings in writing.