Hardware schedules, written and reviewed.
The schedule decides what every opening in the building gets. A mistake in it is installed hundreds of times before anyone notices, and correcting it afterward means buying the hardware twice. This is spec-level work — writing schedules, reviewing them, and handling substitutions.
What This Covers
Schedule Review Against the Drawings
Every hardware set checked against the door schedule, the floor plans, and the applicable codes. Function against use, grade against traffic, handing against swing, and listings against the rating on each rated opening. The errors that matter are rarely visible without that comparison.
Schedules Written to the Application
Where there's no schedule yet, one written to the building rather than copied from the last job — traffic, environment, occupancy, and code, with grades and finishes named explicitly so nothing can be quietly downgraded later.
Substitution Requests, Assessed Honestly
Some substitutions really are equal and save real money on lead time or cost. Some are a grade drop or a function change in disguise. The three questions are always the same: same function, same grade, same listings. No manufacturer affiliation means the answer can just be the answer.
Submittal Coordination
Reviewing the distributor submittal against the specification before approval — the cheapest moment to catch anything. Keying schedules, electrified hardware coordination, and the power transfer details that get left to the field and then don't work.
The expensive decisions are made on paper.
Months before anything is installed, and by people who will never see the building in service. A review at the submittal stage costs a fraction of one opening redone.
Symptoms Worth a Second Look
- A schedule produced by the party also selling the hardware, with no independent review
- Fail-safe and fail-secure specified without reference to egress or occupancy
- Grade drops buried in a long schedule on a large project
- Handing errors that stall the job when hardware physically won't fit
- Closers sized without regard to arm type, so doors don't latch
- Pairs with no coordinator, astragal, or flush bolts specified
Who this is for
- Architects and specifiers who need a hardware schedule written, or an existing one reviewed before it goes out.
- General contractors managing a submittal that needs checking against the specification before approval.
- Owners' representatives who want someone independent of the supply chain reading the schedule.
Background
More than twenty years of field experience is what makes a schedule review useful — knowing what fails in service, not just what's listed.
Questions About Hardware Scheduling & Spec Review
- Can you review a Division 08 hardware schedule before bid?
Yes, and that's the cheapest time to do it. Each set is checked against the door schedule, the plans, and code: function, grade, handing, and listings for rated openings.
- How do you evaluate a substitution request?
Same function, same grade, same listings. If a substitute matches all three and fits the door and frame preps, it's usually acceptable.
If not, it isn't, regardless of price.
- Do you write schedules from scratch?
Yes — written for the building's traffic, environment, occupancy, and code requirements, not copied from the last job.
- Is this done remotely?
Yes. Drawings, specs, and submittals can all be reviewed remotely, anywhere.
Related
Have a schedule that needs a second set of eyes?
Send the schedule and the door schedule. A free 15-minute call is usually enough to scope it.