Adams Rite — the storefront standard.
If a building has an aluminum-and-glass front door, there is a very good chance Adams Rite hardware is inside it. The MS1850S deadlock has been the narrow-stile standard for decades, and the 4900 deadlatch carries the daily traffic behind it.
What Shows Up on the Door
MS1850S Deadlocks
The maximum-security swingbolt deadlock inside most narrow-stile storefront doors. A stiff throw is usually the door settling rather than the lock failing — the bolt and the strike stop agreeing on where center is. Worth checking alignment before anyone quotes a replacement.
4900 Deadlatches & Paddles
The heavy-duty deadlatch and the paddles and levers that drive it. This is the hardware that sees every cycle, so it wears first: worn latches, sagging paddles, and the slow drift out of alignment that ends with a door that will not latch on the first pull.
8400 Exit Devices & Electric Strikes
Adams Rite narrow-stile exit devices and electric strikes for access-controlled storefronts. On a narrow stile there is very little material to work with, so the device, the frame prep, and the wiring path have to be considered together rather than in sequence.
Storefront doors fail at the worst possible time — opening time.
Aluminum doors flex, settle and wear, and the narrow-stile hardware inside them absorbs all of it. Most Adams Rite complaints trace back to geometry rather than the lock: the door has moved, and the hardware is being asked to span the difference.
Symptoms Worth a Second Look
- The key turns but the bolt will not throw
- The door will not lock without lifting or pulling it
- The paddle flops or needs a hip to operate
- The latch misses the strike since the door settled
- The cylinder spins freely or feels gritty
- The bolt drags on the strike in cold weather
- The electric strike releases inconsistently
- The door is sound but the hardware is original to the building
Adams Rite on the opening?
Tell me what the door is doing and what building it is in. I read everything that comes through and will reply directly.
Contact meOneSource Integration LLC is independent and not affiliated with, authorized by, or endorsed by Adams Rite. Adams Rite and its product names are trademarks of their respective owner, used here only to describe the hardware discussed.